You cannot place a new order from your country. United States

DA-31 Race Fuel Pump w/ Inlet & Outlet View larger

DA-31 Race Fuel Pump w/ Inlet & Outlet

DA02+DA07+DA08

New product

In Stock

Add to wishlist

More info

The DA-31 is a custom made high specification fast road / racing fuel pump compatible with a wide variety of high performance car makes and models. It will provide enough fuelling for 600-700bhp on turbo applications. These pumps are being used all over the world and have been sold by us successfully for many years. if you're planning on racing with it then its advised to use two so one is used as a backup.

The DA-31 is ideal as a replacement up-rated fuel pump for any car or modifying/race car project, whether it’s turbo/supercharged or normally aspirated. If you're up-rating your turbo, injectors, cams, boost, internal polishing, weight reduction, balancing and transmission then spend money to upgrade your fuel pump. Remember, you can never have a big enough fuel pump and risking the chance of running lean is a no-no.

Many of our customers use these for race applications and mount them externally. However if you know what you're doing, you can mount the pump in-tank as they have been designed and produced to be submergible as well.

As an added measure of protection, we've managed to incorporate an inline filter to the inside of the DA-31 pumps inlet. This is also something which you do not see on normal fuel pumps. It means less hassle and expense for you, you can literally just connect this up inline and it will draw from your tank.

The inlet and outlet on the pump are parallel so matching the pump up on most vehicles is very simple. In some cases you might require an additional pipe joiner and fittings but no serious modifications will be necessary. However if you're not experienced then we advise that you seek professional help.

 

Kit Contents:

  • 1x DA-31 High Performance Racing Fuel Pump
  • 1x Wiring kit
  • 1x Inlet fitting M18 x 1.5mm | I.D 12.5mm | O.D 15mm (suitable for 15mm inlet fuel hose)
  • 1x Outlet banjo fitting with M12x1.5mm capnut and washers (will allow a 8mm fuel hose onto the barbed push on outlet)

 

Specification:

  • High quality internal fuel filter/strainer
  • Operating temperature of Sub 0 to 80 Degrees
  • Operating pressure 3-9 Bar
  • 10.3 Bar safety shut Off
  • Very compact in design, 18.5cm in length, 6.2cm in diameter, 1.1kg in weight
  • Non return valve fitted to outlet
  • Extremely robust casing

30 other products in the same category: