Warning: Last items in stock!
Replaces Part Numbers:
WHEN FITTING THIS TURBO, IT IS CRITICAL THE FOLLOWING INSTRUCTIONS ARE ADHERED TO:
• Replace Oil and Filter BEFORE fitting turbocharger
Prior to fitting the new turbocharger replace oil filter and refill SLOWLY with new oil.
When filling this engine with oil, it is easy for excess oil to enter the engine breather system and collect in the air intake. If this is occurs, the turbocharger will be immediately damaged on start up, therefore best practice is to replace the engine oil first. Any oil in the intake system can then be then be located and removed when fitting the turbocharger, cleaning components as required.
Care should also be taken to fit the exhaust inlet gasket in the correct orientation. It is possible to fit this incorrectly and restrict the flow of exhaust gas to the turbo.
Please use the table below to check if this part fits your car. If you don't know your cars engine code or model, it can be found in your vehicles V5C logbook, if you're still having difficulty please see the 'How to identify the correct turbo'.
|Manufacturer||Application Model||Engine||Engine Code||Year||OEM Part||Turbo Model|
|Renault||Laguna dCi - 120 HP||1.9 D||F9Q650/F9Q670/F9Q674/F9Q750||2001 - 2004||8200683855||G GT17 VNT|
|Volvo||S40 1.9 Di - 115 HP||1.9 D||D4192T3||2001 - 2004||8200683855||G GT17 VNT|
|Renault||Megane II dCi - 120 HP||1.9 D||F9Q800/F9Q812||2002 - 2005||8200683855||G GT17 VNT|
|Renault||Scenic DCi - 120 HP||1.9 D||F9Q812||2003 - 2005||8200110519A||G GTA17V VNT|
|Renault||Espace dCi - 120 HP||1.9 D||F9Q680/F9Q820/F9Q826||2003 - 2007||8200683855||G GT17 VNT|
|Renault||Grand Scenic DCi - 120 HP||1.9 D||F9Q812||2004 - 2005||8200110519A||G GTA17V VNT|
Identifying the Correct Turbo
The best way to identify the correct turbo for your car is to take a look at the turbochargers name plate on the unit itself, engraved on the plate will be the turbo model name, turbo manufacturer's part number and the vehicles manufacturer's part number of which you can match up when searching for a replacement.
If the name plate is missing or difficult to read on the turbocharger, please obtain the following information to help us determine the correct turbocharger for your application using our vehicle parts database and email us over your:
FREE FitKit Included + 2 Year Replacement Warranty
We provide a FREE FitKit, including oil filled pre-priming injector for safer first start-up.
Symptoms of a Turbocharger Failure:
The easiest way to diagnose a weak turbo is to observe the vacuum/boost gauge or boost indicator light. If at full throttle it doesn't show full boost (typically 9 to 14 PSI for many OEM turbo systems) it's best to have it looked at by a professional mechanic. However be warned, as excessive backpressure (often due to a clogged catalytic converter) can also prevent the turbo from developing its normal boost pressure.
Why choose Garrett?
A turbo is a high technology product that requires superior design and intensive capital to produce. It must meet the severe requirement that only a world class manufacturer like Garrett can achieve.
Garrett is one of the few turbo-charging manufacturers that subjects our turbos to several OE qualification tests. These turbocharging "qual tests" ensure Garrett produces a safe and reliable turbo for OE applications. When you buy a Garrett turbo you can be sure it is a reliable one!
On-Engine Durability - A 1,000-hour general turbocharger durability test that is run on-engine in one of Garrett's engineering laboratories. Some engines die before our turbos do!
Gas Stand Cyclic Durability (aka The Non-Sissy Test)- A 500 hour general turbocharger durability test. This is basically a "beat the crap out of the turbo" test. Survive this one and you've got one tough turbo!
Compressor & Turbine Housing Containment - A compressor/turbine wheel is weakened to "hub" burst at a specific speed. No portion of the wheel is allowed to penetrate a "containment shroud" surrounding the turbocharger. A test to ensure safety.
Shaft Motion - The maximum tolerances of the bearing system are tested for rotordynamic stability beyond the maximum turbocharger operating speed. This means no bearing problems and a long turbo life.
Thrust Bearing Capacity - A test that stresses the thrust bearing at extreme conditions. This test makes sure your Garrett turbocharger can tolerate the load you put it through.
Compressor & Turbine Seal- Multiple turbochargers are run on-engine under conditions designed to cause seal leakage. No significant leakage is allowed during these tests.
Heat Soakback- A turbocharger instrumented with thermocouples is taken beyond maximum operating temperature and shut down hard! Repeat the test four more times and make sure maximum temperatures stay within our strict limits to avoid oil "coking" or build up inside the center housing. This is particularly critical for high temperature gasoline applications.
Compressor & Turbine Performance - The entire operating range of both the compressor and turbine are mapped on one of Garrett's "Performance Gas Stands." These test cells are calibrated to strict standards to assure accuracy and consistency.
Compressor & Turbine Blade Frequencies - Garrett has strict requirements for compressor and turbine blade natural frequency. This is critical on large trims where the blade must be stiff enough to withstand potentially damaging vibrations.
Thermal Cycle - A 200-hour endurance test that cycles the turbocharger from low temperature to "glowing red" every 10 minutes. To ensure a long turbo life, no cracking of the turbine housing or distortion of the heat shroud are allowed.
Rotor Inertia- A measurement made to document the rotational inertia of Garrett's compressor and turbine wheels. Garrett's products are known for their high flow / low inertia characteristics.
Shaft Critical Speed - An analytical "test" that ensures that destructive shaft "critical speeds" are well out of the turbocharger operating range. For example, large wheels may require a large shaft diameter to avoid the "shaft bending" critical speed.
Compressor Fatigue- Garrett will not sell compressor or turbine wheel castings that have not passed a strict "test to failure" cyclic fatigue test. Garrett runs tests on a regular basis to ensure quality and to constantly improve our products.
Turbo Vibration - The entire turbocharger is vibrated on Garrett's large shaker table. Vibration levels are monitored to ensure product durability.
A Garrett turbo offers you the best value in terms of quality and competitive price. A quality commitment goes way beyond the manufacture of product. At Garrett, it has to do with the very aspect of business life. Protect your investment today. You can relax, enjoy, and drive with confidence with the knowledge that your Garrett turbo is a reliable turbo.
What is a VGT, VNT or VTG Turbo?
Garrett’s VNT™ (Variable Nozzle Turbine), BorgWarner’s VTG™ (Variable Turbine Geometry) and Holset’s VGT™ (Variable Geometry Turbochargers are a family of turbochargers, usually designed to allow the effective aspect ratio (sometimes called A/R Ratio) of the turbo to be altered as conditions change. This is done because optimum aspect ratio at low engine speeds is very different from that at high engine speeds. If the aspect ratio is too large, the turbo will fail to create boost at low speeds; if the aspect ratio is too small, the turbo will choke the engine at high speeds, leading to high exhaust manifold pressures, high pumping losses, and ultimately lower power output. By altering the geometry of the turbine housing as the engine accelerates, the turbo's aspect ratio can be maintained at its optimum. Because of this, VGTs have a minimal amount of lag, have a low boost threshold, and are very efficient at higher engine speeds. VGTs do not require a wastegate. VGTs tend to be much more common on diesel engines as the lower exhaust temperatures mean they are less prone to failure. The few early gasoline-engine VGTs required significant pre-charge cooling to extend the turbocharger life to reasonable levels, but advances in material technology has improved their resistance to the high temperatures of gasoline engine exhaust and they have started to appear increasingly in, e.g., gasoline-engined sports cars.
WARNING - THE EXPENSIVE TRUTH ABOUT CHEAP TURBO'S!
Please be VERY aware of non original turbochargers on the market.
The first instance is to think 'I'll get that one because it's the cheapest', however most are actually counterfeit Chinese pattern part turbo's. Companies that sell this type of turbo will often have no PRODUCT LIABILITY INSURANCE because an insurance company will only give product liability insurance to a company for the manufacture of a serious engine component if they have a comprehensive quality control program.
Cheap counterfeit turbochargers will fail prematurely and can easily cause serious engine damage as they break up.
Many counterfeit Chinese made turbo's appearing on the market have undergone thorough testing side by side with genuine units by experts such as Cummins Inc. and have been proven that they do NOT meet safety standards when tested to destruction because of the low quality materials used during manufacture.
Genuine Turbo's have to pass stringent tests to make sure that in the event of a failure, the internals are kept within the housing, counterfeit turbo's have been found to EXPLODE off the testing bench under the same operating pressure.They have no where near the same depth of precision and quality as an original unit! So if you want to look after your car and your pocket in the long run, buy an original manufactured turbo!
LOOK UP ON YOUTUBE 'COUNTERFEIT TURBO TESTING' - IT WILL CONVINCE YOU!
FOR THIS REASON WE ONLY STOCK ORIGINAL TURBOCHARGERS